A system that uses X-rays to detect internal cracks that cannot be found by visual inspection. 【Machine Name】 X-ray Inspection System 【Overview】 A system that uses X-rays to detect internal cracks that cannot be found by visual inspection. 【Specifications & Features】 - Lead-lined cover prevents X-ray leakage. - Can be equipped with automatic handling by a 6-axis robot.

A system that inspects the soldering condition on circuit boards. 【Machine Name】 Solder Joint Visual Inspection System 【Overview】 A system that inspects the soldering condition on circuit boards. 【Specifications & Features】 ■ Captures board fiducial marks with a CCD camera. ■ XYθ correction feeds boards to the soldering robot with stable positioning accuracy. ■ Lead-free soldering is possible without pre-applying flux or creating a nitrogen atmosphere. ■ SCARA-type soldering

A system that automatically feeds aspheric lenses from trays to the next process and returns finished lenses to their original tray positions. 【Machine Name】 Automatic Aspheric Lens Transfer & Feeding System 【Overview】 A system that automatically feeds aspheric lenses from trays to the next process and returns finished lenses to their original tray positions. 【Specifications & Features】 ■ High-speed axes enable fast positioning and operation. ■ Fully custom-built to the custo

【Machine Name】 Copper Foil Mounting Machine 【Overview】 A machine that automatically punches copper foil to a specified size, then bonds and mounts it. 【Specifications & Features】 ■ Automatically punches copper foil from a reel to a specified size. ■ Two SCARA robots handle bonding and mounting, shortening tact time. ■ Target workpiece: Sheets up to 420 × 620 mm ■ Copper foil reel: Max. φ450 mm, paper core inner diameter 300 mm, max. weight 5 kg ■ Tact time: 6 s per point

A system that measures resistance at specified points on a sheet. 【Machine Name】 Resistance Measurement System 【Overview】 A system that measures resistance at specified points on a sheet. 【Specifications & Features】 ■ Reads QR codes at any position, contacts probes at specified points, and judges resistance data as pass/fail ■ Target workpiece: Sheets up to 400 × 600 mm ■ Tact time: 5 s per point

【Machine Name】 Automatic Calibration System 【Overview】 A system that automates workpiece calibration. Workpieces set on measurement stages are automatically loaded and calibrated. After outputting the measured values and completing calibration, each workpiece is automatically ejected together with its measurement stage. 【Specifications & Features】 ■ Calibrates 2 workpieces simultaneously, up to 20 in a continuous run ■ Holds up to 22 measurement stages ■ Calibration mode: Cal

【Machine Name】 Coating Inspection System 【Overview】 A system that precisely aligns product sheets and applies hot melt adhesive. It aligns the loaded product sheet, applies hot melt, performs image inspection, and then transfers the sheet out. 【Specifications & Features】 ■ Coating position accuracy: ±0.1 mm ■ Alignment: Products are held by vacuum suction. After target marks are detected by camera, position is corrected on the table's XYθ axes. ■ Image inspection: Measures th

【Machine Name】 Automatic Semiconductor Wafer Transfer Mechanism 【Overview】 A system that automatically supplies semiconductor wafers to an inspection machine. It takes wafers out of the carrier, corrects their position through pre-alignment, and feeds them to the inspection unit. After inspection, wafers are automatically unloaded and returned to their original positions in the carrier. A vibration isolation mechanism prevents vibration during inspection. 【Specifications & Fe

【Machine Name】 Automatic Feeder for Ultrasonic Inspection Machines 【Overview】 A system that transfers cases loaded with inspection items, feeds them into an ultrasonic flaw detection unit, and carries the cases out after data collection and report output. ◇ Automatically transfers cases loaded with products. ◇ Reads lot information from QR codes, feeds products into the ultrasonic flaw detector, and inputs/outputs image analysis data. ◇ After inspection, blows off moisture wi

↓ Download the materials here (Japanese)